|
Mfg: Powers Fasteners Inc
Published: 2007
Version: 49136 10/07
51
pages
Recsa 502-2367-3069 58 212 264 1313 Note:The information and data contained within this documentation was current as of November 2007.The information is for marketing purposes only and is subject to change and updates as needed.Powers Fasteners,Inc.reserves the right to change designs and specifications without notice or liability for
Add to My Library
|
|
|
Mfg: Powers Fasteners Inc
Published: 2011
Version: 49083
20
pages
It is simple to install, easy to identify and fully removable. The Wedge-Bolt+ has many features and benefits that make it well suited for many applications in a variety of base materials. The anchor is designed for consistent and reliable performance in cracked and uncracked concrete, as well as grouted masonry.
Add to My Library
|
|
|
Mfg: Powers Fasteners Inc
Published: 2011
Version: 49084
20
pages
Designed for high reliability,low maintenance and economy. This tool uses four levels of power;grey through yellow loads(levels 1-4)and.300,8mm head fasteners with lengths of 1/2"through 3". For additional spare parts please reference the tool manual or Powers’ Buyers Guide. The P2201 is a low velocity,single shot,.22 caliber tool which can be used to install.300 head drive pins,8mm head drive pins and 1/4"-20 threaded studs,up to 3"in total length.The P2201 is designed for maintenance or residential contractors.
Add to My Library
|
|
|
Mfg: Powers Fasteners Inc
Published: 2010
Version: 49124 1/10
20
pages
150 Joules of energy, and can drive pins up to 2-9/16” in length, and shank diameters up to .145”. Great for attaching wood to steel and concrete. Trak-It®C4 is ideal for steel to steel applications that demand tool portability Powers’ Trak-It®C4 has redefined high volume gas fastening for steel and wood to both steel and concrete.
Add to My Library
|
|
|
Mfg: Powers Fasteners Inc
Published: 2009
Version: 49138 12/09 REV. 1
20
pages
The building code serves as the basic‘roadmap’that an engineer uses to design a structure.The new building code which is now in effect addresses anchor design.The previous versions of the building code(known as legacy codes)did not directly address post-installed anchoring applications.In prior years many structural engineers relied on
Add to My Library
|
|
|
Mfg: Powers Fasteners Inc
Published: 2011
Version: 49053
12
pages
E Vertigo is an all steel threaded fastening system for suspending steel threaded rod vertically overhead in pipe hanging, fire protection, electrical conduit and cable-tray applications. Vertigo can be installed in a variety of base materials including steel bar joists and beams, wood frame columns and beams, as well as concrete ceilings, beams and columns.
Add to My Library
|
|
|
Mfg: Powers Fasteners Inc
Published: 2011
Version: 49142
12
pages
The Power-Stud+ SD1 anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal-weight concrete, structural sand-lightweight concrete, concrete over metal deck and grouted concrete masonry.
Add to My Library
|
|
|
Mfg: Powers Fasteners Inc
Published: 2009
Version: 49053 01/09
12
pages
E Vertigo is an all steel threaded fastening system for suspending steel threaded rod vertically overhead in pipe hanging,fire protection,electrical conduit and cable-tray applications. Vertigo can be installed in a variety of base materials including steel bar joists and beams,wood frame columns and beams,as well as concrete ceilings,beams and columns.
Add to My Library
|
|
|
Mfg: Powers Fasteners Inc
Published: 2011
Version: 49069
8
pages
Two years in a dry,dark environment with temperatures ranging from 40-95˚ F. T308+ is a two-component epoxy adhesive anchoring system.The system includes injection adhesive in plastic cartridges, mixing nozzles, dispensing tools and hole cleaning equipment.The T308+ is designed for bonding threaded rod and reinforcing bar into drilled holes in concrete base materials.
Add to My Library
|
|
|
Mfg: Powers Fasteners Inc
Published: 2011
Version: 49159 07/11
8
pages
Powers is a proud member of: one-piece self-tapping concrete screw for use in a variety of light to medium duty applications in base materials including concrete, masonry and wood. It features a corrosion resistant Perma-Seal®coating and an optimized thread design for lower installation torque. The screw also incorporates a gimlet drill point for wood base materials (no pre-drilling required).
Add to My Library
|
|